Ibis Mojo HD EVO Project

As my riding preferences change, my Ibis Mojo HD changes as well towards more gravity oriented riding.

Ibis Mojo HD original build (V1, mid 2011):

Frame: Ibis Mojo HD 19"
Fork: Fox Float 36 RLC 160mm
Shock: Fox Float rp23
Headset: Cane Creek
Cranks: Shimano XRT 44-32-22
Bottom bracket: Shomano XTR
Front derailleur: Shimano XT
Rear derailleur: SRAM X.0 long cage
Shifters: SRAM X.7
Cassette: SRAM PG990
Chain: Campagnolo C9
Wheel hubs: Hope PRO II 20mm/12mm
Rims: ZTR Flow
Front tyre: Maxxis Minion DHF 2,35" (ghetto UST)
Rear tyre: Maxxis High Roller 2,35" (LUST)
Spokes: Sapim Race
Brakes: Formula The One
Pedals: NsBikes Aerial
Handlebar: Race Face Atlas 725mm
Grips: ODI Rogue
Stem: Race Face Atlas 70mm
Seatpost: RockShox Reverb
Seat: Fizik Gobi MX
Weight: 13.2kg

Ibis Mojo HD actual build (end 2012)

So far I'm halfway to my dream build for the next season:

Changes made since V1: Handlebar: Burgtec Ridewider bars 780mm
Stem: Sunline V1 50mm
Brakes: Shimano Saint
Tires: Continental Rubber Queen 2,2" UST
Cranks: Shimano XTR single chainring 32t
Chain guide: MRP G2
Front derailleur: removed
Shock: RockShox Vivid R2C coil (400lbs coil) M/M tune
Weight: 14kg

Actual weight is little bit higher, but shock performance is night and day compared to previous air shock. Bike pedals even better, no propedal is needed and it doesn't give its travel when it isn't really needed. Surprisingly bottom out control is very good despite it being really simple. I will get it retuned to lower compression during the next service though.

Additional planned changes:
Fork: Marzocchi 55 RC3 EVO V.2 TITANIUM 170mm
Shock: Titanium spring
Headset: Cane Creek Angleset (-1deg)
Brake rotors: 203mm
Rear derailleur: Shimano Saint short cage 10spd
Shifter: Shimano Saint
Cassette: 10spd 11-36t
Wheels: Syntace W35 MX
Target weight: 14kg

Coil fork will add ±350g which will be compensated for by a Ti coil. 170mm fork (555 AC height) will change the head angle to 66.5deg (Fox AC height is 545mm). Angleset will slacken the head angle even more to 65.5deg and it will also decrease the stack heigh by about 10mm.